Gas Generator Sets for Oilfields: Turning Available Gas into a Practical Power Source

Power supply is a major operating consideration for oilfields, particularly at sites located far from established electricity networks. Drilling equipment, production facilities, pumping systems, compressors, and monitoring equipment all depend on a stable source of electricity. In many cases, diesel generator sets provide the primary power supply. However, some oilfields have another energy resource available on site: natural gas produced during oil extraction.

For operators with a suitable gas supply, gas generator sets offer an alternative way to produce electricity while making use of an existing field resource. Their suitability depends on gas availability, composition, operating conditions, and the site's electrical demand. These factors need to be evaluated before a project decides whether gas-fired generation should become its main power source or part of a hybrid arrangement.

Using Oilfield Gas for Electricity Generation

Oil production can bring associated gas to the surface alongside crude oil. Depending on the field and its production process, this gas may be collected, processed, transported, or used for energy generation.

Rather than relying entirely on diesel deliveries, an oilfield may be able to use available gas to operate gas generator sets. Electricity produced on site can support production equipment, auxiliary systems, accommodation facilities, and other electrical loads.

The practical value comes from matching the available gas resource with the site's power requirements. A project with a stable gas supply and consistent electricity demand may have a stronger case for gas generation than a temporary drilling site with changing fuel availability.

However, associated gas cannot always be fed directly into an engine. Its composition, pressure, moisture content, and contaminants must be checked against the generator manufacturer's requirements. Gas treatment or conditioning equipment may be needed to provide a suitable and stable fuel supply.

This assessment should take place before equipment selection. A generator's rated output alone cannot determine whether the available field gas is appropriate for continuous operation.

Reducing Dependence on Diesel Fuel Deliveries

Fuel logistics can become a significant operating challenge at remote oilfield locations. Diesel may need to be transported over long distances, sometimes through roads affected by weather, terrain, or limited infrastructure. Delivery delays can place pressure on fuel storage and create additional risks for continuous operations.

When a suitable gas source is available, gas-fired generation can reduce the site's dependence on diesel deliveries. The benefit is particularly relevant to production facilities that operate for extended periods and have access to a relatively stable gas supply.

This does not mean diesel generator sets become unnecessary. Gas production can fluctuate, and equipment may need to stop for inspection or maintenance. A backup power arrangement remains important where an interruption would affect critical operations.

Project managers should compare the cost and reliability of both fuel supply chains. Diesel storage and transportation costs need to be considered alongside gas collection, treatment, and delivery infrastructure. The most suitable option depends on the actual conditions of the field rather than a general preference for one fuel type.

Supporting Continuous Power Demand at Production Sites

Oilfield electricity demand changes according to the work being carried out. Drilling operations can involve substantial and rapidly changing loads from pumps, drives, and auxiliary machinery. Production facilities may have a more consistent demand profile, with pumping systems, separation equipment, compressors, and control systems operating for long periods.

Gas generator sets can be considered for production applications where the fuel supply and operating conditions support sustained generation. Their output needs to match the site's load profile, including peak demand and the starting requirements of large motors.

For projects with variable loads, operating several generator sets in parallel may provide greater flexibility than relying on one oversized unit. Capacity can be adjusted according to demand, while other units remain available for maintenance or standby service.

The project team should also review generator duty ratings. Prime power, continuous power, and standby power describe different operating requirements. A set intended for standby use should not be selected for a demanding continuous-duty application without confirming that its rating supports the expected operating pattern.

Considering Emissions and Site Requirements

Environmental requirements are becoming an important part of power equipment procurement. Oilfield operators may need to meet local regulations covering exhaust emissions, noise, fuel handling, and equipment installation.

Gas generator sets can offer lower emissions of certain pollutants compared with diesel generation, depending on engine technology, gas composition, operating conditions, and the specific emissions being measured. The actual environmental performance should be confirmed through manufacturer data for the selected configuration.

Gas generation also requires attention to fuel handling and safety. Gas supply systems, pipelines, valves, pressure regulation equipment, ventilation, and emergency shutdown arrangements must be designed according to the applicable standards and site requirements.

For remote projects, the equipment enclosure and installation layout also matter. Dust, high ambient temperatures, vibration, and limited maintenance access can affect long-term operation. A suitable generator configuration should reflect these conditions from the beginning of the project.

Gas Generator Sets Still Need a Reliable Backup Plan

One of the main considerations in oilfield gas generation is fuel availability. Associated gas production may change with field conditions, and gas processing equipment can require maintenance. If the generator depends entirely on this supply, any interruption may affect electricity production.

A practical power plan should identify how critical loads will be supported when gas generation is unavailable. Diesel generator sets can provide backup capacity, while battery energy storage may help manage short-term load changes and support selected loads during source transitions.

For larger installations, parallel generator configurations can also improve operating flexibility. The final arrangement depends on the required level of redundancy, the site's load profile, and the consequences of an unexpected shutdown.

Operators should avoid treating backup capacity as an optional addition. The cost of standby equipment should be compared with the potential production losses and operational disruption caused by a power interruption.

What Buyers Should Check Before Ordering an Oilfield Gas Genset

Selecting a gas generator for an oilfield requires more information than the site's estimated power demand. Buyers should prepare the technical details needed for the manufacturer to evaluate the application.

Important points include:

  • Gas composition: Confirm methane content, heating value, moisture, and potential contaminants.

  • Gas supply conditions: Provide the available pressure, flow rate, and expected supply fluctuations.

  • Electrical demand: Identify typical load, peak demand, motor starting requirements, and operating schedules.

  • Operating environment: Review ambient temperature, dust exposure, vibration, installation location, and ventilation.

  • Generator configuration: Determine whether the project needs one unit, parallel operation, or a combination of gas and diesel generation.

  • Maintenance support: Confirm service intervals, spare parts availability, technical assistance, and operator training.

  • Compliance requirements: Check the applicable emissions, electrical, and site safety standards.

These details help prevent equipment mismatches. They also give suppliers a clearer basis for recommending a gas generator set that can operate under the actual conditions of the oilfield.

Working With a Supplier That Understands Remote Power Applications

Oilfield power equipment is often installed in locations where access to technical support is limited. The manufacturer's responsibilities should therefore extend beyond supplying a generator set.

Buyers should review factory testing procedures, technical documentation, commissioning guidance, warranty conditions, and the availability of replacement parts. For projects operating in remote areas, regional service resources can also make maintenance coordination more practical.

SWT supplies diesel and gas generator sets ranging from 8 to 4,500 kVA, along with containerized and silent configurations. Its power equipment portfolio also covers hybrid energy systems and customized power solutions for industrial applications.

For oilfield operators comparing different power sources, the company's article on how to compare diesel, gas, and hybrid power for mining offers additional reference points on fuel selection and system configuration.

More information about the advantages of gas generator sets in oilfields is also available for project teams evaluating gas-fired generation.

Making Gas Generation Part of a Long-Term Power Strategy

Gas generator sets can be a practical choice for oilfields with suitable fuel resources and sustained electricity demand. They can make use of available associated gas, reduce reliance on diesel transportation, and support continuous production activities when the system is properly designed.

The decision still requires a careful review of gas quality, supply stability, load characteristics, environmental conditions, and maintenance arrangements. Diesel backup and energy storage may also be necessary to protect critical operations when the gas supply or generator equipment is unavailable.

For oilfield operators, the objective should be to build a power arrangement around the resources and operating conditions of the site. Gas generation can play an important role in that arrangement, provided that equipment selection and system integration are based on actual project requirements.

Home


swt

You May Also Like

More From Author

+ There are no comments

Add yours