Precautions for making drinks with SUNKONZ® commercial multi-functional blenders

Commercial multi-functional blenders are essential appliances for restaurants, tea shops, and cafes, which can efficiently make fresh juices and smoothies. However, improper use of these machines can lead to equipment failure, safety hazards, and poor beverage quality. Users must follow specific precautions to maximize performance, ensure longevity, and maintain safety. In this blog post, SUNKONZ® multi-functional blender manufacturers will share the precautions for making drinks with high performance commercial multi-functional blenders.

1. Introduction of SUNKONZ® Multi-functional Blender

1.1. Schematic diagram of key components

1.2. Introduction of key components of multi-functional blender

● Sound Enclosure Components: Divided into upper soundproof cover, lower soundproof cover, and induction magnet, made of high-quality PC material, anti-collision, and soundproof.

● Metal Base: made of zinc alloy die-casting, where the drive shaft of the mixing cup is connected to the motor to rotate the blender knife group.

● Mixing Cup: consists of cup body, knife group, and cup cover.

The mixing cup is made of special materials that meet food hygiene and safety requirements, does not contain bisphenol A, is of high quality, has a large capacity, and the transparent material allows clear observation of the blending process of the ingredients.

● Blade Components: The patented "one" blunt knife design has high mixing efficiency, uniform processing of ingredients, easy cleaning, and is safe and does not hurt your hands.

● LCD Screen: Displays the number of times the multi-functional blender runs, the status, the speed, and the time of the machine during operation.

● Membrane Switch: It includes the electronic control system on/off key, instant (pulse) key, smart shortcut key, speed and time adjustment key, custom setting auxiliary key, and confirmation key.

2. Installation environment requirements

● The multi-functional blender should be installed on a dry and flat work surface and use a 220- 240V power supply type.

● The power plug of the multi-functional blender must be adapted to a grounded three-hole socket, the main circuit must be installed with a leakage protection switch, and the circuit must be grounded.

● A space of no less than 10cm of air circulation must be reserved around the multi-functional blender.

3. First use

● Check whether the accessories are complete and whether there is any damage during transportation according to the packing list. Contact SUNKONZ® Corporation or an authorized agent immediately if an abnormality is detected.

● Clean the SUNKONZ® mixing cup. It is recommended to use Kaimi-plant-derived tableware cleaner (concentrated).

*Machine wash: Measure 500-600ml (300-400ml for non-pressure relief cup cover) of clean water according to the scale line on the cup body, add 3-4 drops (about 1g) of Kaimi tableware cleaner, stir at gear 5-6 (3-4 for non-pressure relief cup cover) for 80-120 (50-60 seconds for non-pressure relief cup cover) seconds, and then use the cleaning liquid in the cup to scrub the inner and outer walls of the mixing cup and the cup cover (the pressure relief cup cover needs to be removed and cleaned), and then rinse with running water.

*Hand washing: Measure 500-600ml (300-400ml for non-pressure relief cup cover) of clean water according to the scale line on the cup body, add 3-4 drops (about 1g) of rice tableware cleaner, scrub the inner and outer walls of the mixing cup and the cup cover with a towel (the pressure relief cup cover needs to remove the small pressure cover for cleaning), and rinse with clean water after cleaning;

● Quick start:

* Plug the power plug into a three-hole socket and turn on the power switch on the back of the machine;

* Press the red "POWER" button to turn on;

* Place the mixing cup on the metal base of the mixing cup, close the sound insulation  cover, and select the corresponding button to start the blending operation;

* After the blending is completed, remove the mixing cup and the product is ready.

4. Raw material preparation and processing

● Wash the fruit thoroughly to remove pesticides and pollutants. Peel thick-skinned fruits (such as oranges and bananas).

● Cut the fruit into small pieces (1-2 inches) for blending to reduce the burden on the motor and improve blending efficiency.

● Do not put non-food, metal utensils, stones, glass, or very hard materials in the mixing cup, as this may pose a danger. When the multi-functional blender is in operation, keep your hands and metal utensils away from the mixing cup to avoid injury or damage to the mixing cup.

● Add liquid (such as water, sugar water, or milk) before blending to increase the fluidity of blending, which is conducive to making higher-quality drinks.

5. Safety operating specifications

● To prevent the risk of electric shock, do not put the power cord, plug, or host into water or other liquids for operation or cleaning.

● If the power cord or plug is damaged, be sure to contact SUNKONZ® after-sales service or designated agents for replacement. Do not repair it yourself to avoid danger.

● Do not hang the power cord on the edge of the table, and do not use an extension cord.

● Precautions when the multi-functional blender is working: A. Keep your hands, hair, and clothes away from all rotating parts. B. When the multi-functional blender is in operation, keep the metal base of the mixing cup and the blade of the mixing cup away from metal utensils. C. When the mixing cup is placed on the metal base of the mixing cup, do not put your hands into the mixing cup or fill it with ingredients. D Do not start the multi-functional blender without a mixing cup. E Do not shake the body and mixing cup when the multi-functional blender is in operation, and keep the mixing cup straight and upward. F. Do not open the sound enclosure cover before the multi-functional blender stops running. The above measures can prevent personal injury or damage to the multi-functional blender.

● Before starting the multifunctional blender to blend, be sure to cover the mixing cup cover.

● During blending, the mixing cup must be properly fixed on the metal base of the mixing cup.

● After using the multi-functional blender for a long time at high load, do not touch the metal base and knife set of the mixing cup.

● Do not put non-food in the mixing cup. Putting metal utensils, stones, glass, or very hard materials in the mixing cup will pose a danger. When the multi-functional blender is in operation, keep your hands and metal utensils away from the mixing cup to avoid injury or damage to the mixing cup.

● The blender knife set uses a blunt "one" blade. Normal cleaning of the blade head, emptying or cleaning of the mixing cup will not cause mechanical damage.

● Stop using the mixing cup immediately if it is cracked, damaged, or the knife set is loose.

● If the multi-functional blender is not used for more than 24 hours, please unplug the power plug and place it in a dry place.

6. Cleaning and maintenance

● Cleaning of SUNKONZ® multi-functional blender:

* Turn off the electronic control system or power switch of the multi-functional blender before cleaning, and unplug the power plug.

* Wipe the body and membrane switch with a wrung-out wet cloth. If the stains are stubborn, wipe them with a dry cloth dipped in detergent. After cleaning, wipe the body and membrane switch with a dry cloth. Be sure to keep the body dry.

● Cleaning of SUNKONZ® mixing cup: To clean the SUNKONZ® mixing cup, it is recommended to use Kaimi-plant-derived tableware cleaner (concentrated). Before use, please rinse off the visible food residue in the mixing cup.

*Machine wash: Measure 500-600ml (300-400ml for non-pressure relief cup cover) of clean water according to the scale line on the cup body, add 3-4 drops (about 1g) of Kaimi tableware cleaner, stir at gear 5-6 (3-4 for non-pressure relief cup cover) for 80-120 (50-60 seconds for non-pressure relief cup cover) seconds, and then use the cleaning liquid in the cup to scrub the inner and outer walls of the mixing cup and the cup cover (the pressure relief cup cover needs to be removed and cleaned), and then rinse with running water.

*Hand washing: Measure 500-600ml (300-400ml for non-pressure relief cup cover) of clean water according to the scale line on the cup body, add 3-4 drops (about 1g) of rice tableware cleaner, scrub the inner and outer walls of the mixing cup and the cup cover with a towel (the pressure relief cup cover needs to remove the small pressure cover for cleaning), and rinse with clean water after cleaning;

● After cleaning the mixing cup, wipe it dry and store it upside down to ensure that there is no water accumulation in the bottom sealing area.

● The bottom of the machine can only be wiped with a damp cloth. Do not put it in water to prevent water from entering the machine and damaging the components.

● Regularly check the connector, mixing cup spline shaft, blade, seal and wire for wear or damage. If necessary, contact SUNKONZ® after-sales service or designated agents for replacement.

● Regularly disinfect the mixing cup with diluted disinfectant (powder) that meets the manufacturer's specifications. The cleaning temperature should be controlled below 80℃. After cleaning and disinfecting the mixing cup, wipe it dry and store it upside down to ensure that there is no water accumulation in the bottom sealing area. For blenders that are not used for a long time, turn the drive shaft for a few seconds before use. This helps the seal at the bottom of the cup to maintain a good shape and extend the service life of the mixing cup.

7. Prevent motor overheating and extend service life

● When used continuously for a long time, stop the blender for 30 minutes to let it cool down.

● The blending volume should be controlled below 1200 ml.

● Keep the ventilation area of the SUNKONZ® multi-functional blender unobstructed to prevent insufficient heat dissipation and overheating of the motor.

● The SUNKONZ® multi-functional blender has a thermal protection function. If the motor is turned off, please unplug the power plug and turn it on again after 10 minutes of power outage. If the alarm cannot be cleared after 10 minutes of power outage, please contact SUNKONZ® or a designated agent.

8. Ensure the quality of drinks

● When making different types of drinks, clean the blender and cover before each making.

● Overripe or spoiled fruits will change the taste and reduce the quality of the drink.

● Prepared drinks should be consumed as soon as possible or stored in a refrigerated environment to prevent bacterial growth.

● Regularly disinfect the main engine, the blender, and the cover.

● SUNKONZ® multi-functional blender has passed EU food grade certification and US NSF certification, and the product is healthy and safe.

9. Storage and handling when not in use

● Place the clean and dry main engine, mixing cup, and cover in a clean and dry place.

● Neatly wind the cord and place it in a dry place.

Conclusion:

Proper use of the SUNKONZ® multi-functional blender ensures efficiency, safety, and the production of high-quality drinks. By following these precautions, users can extend the life of the blender and achieve optimal performance. The multifunctional commercial blender provided by SUNKONZ® is safe and reliable, with exquisite workmanship and stable quality. It has the advantages of high power, low noise, high efficiency, intelligent design, and customized menus. The mixing cup has a pressure relief function and good sealing. It has been widely used in domestic and foreign hotels, restaurants, beverage chains, and other places.

www.sunkonz.net
SUNKONZ